skip to Main Content

MaxiLog-PDF Temperature Data Logger

A single-use, 90 day temperature data logger with USB connectivity and PDF reports.

Memory: 12,900 data points
Temperature Range:
-30°C TO +70°C / -22°F to +158°F

CALL 800-858-6872

TO ORDER / MORE INFO


Download Product Brief:
MaxiLog-PDF

Description

The Maxilog–PDF logger is now available for use in cold chain applications to escort critical temperature shipments of pharmaceuticals, seafood, product, dairy, meat, and other refrigerated products. The logger is programmed to operate for 90 days of continuous temperature recording. This logger is completely pre-programmed with start delay of 30 minutes to allow the logger to adjust to the internal temperatures of the cargo being shipped.

The unit is compact, lightweight and fits easily into small packages. No special software or drivers are required for set-up, or to download the temperature time-stamped data. When plugged into a USB port, the logger will automatically download the data to a Graph, Summary Information and Tabular Results file.

The logger is a mass storage device with memory storage of 12,900, and measurement intervals of 10 minutes. Monitor all your shipments with USB plug and play technology.

MaxiLog-PDF – SKU #7049
Logger Category, Description Category 1, Single-Use. Low-cost compact data logger with Mini-USB connection to PC.
Memory/Storage 12.900 measurements
Internal Sensor Nist-traceable Precision SMT Thermistor
Range: -30°C to +70°C / -22°F to +158°F
Accuracy: ±0.5°C at -20° to +40°C, ±1.0°C at extremes / ±0.9°F at 4° to 104°F, ±1.8°F at extremes
External Sensor/Probe count and connector type None
Alarm Programming Pre-programmed to 90 days.
Alarm Modes None
Alarm Reset Options None
Alarm Notifications Red LED flashes when button is pushed.
Audible Alarm None
Display None
Indicators LED indicators: on/recording (green), alarm (red)
Size and Weight 5.6 cm(l) x 3.65 cm(w) x 6.9 mm(d) / 2.2 in.(l) x 1.44 in.(w) x 0.236 in.(d)
16.6 g / .586 oz.
CE Certified Yes
Water-resistant Yes, IP67 rated
Internal Firmware, Internal Clock Accuracy Internal Clock, Start/Stop time, Interval, Alarm values, Recording status, Firmware version, Serial number, Model.
Clock Accuracy is better than 2 minutes per month on average at normal temperatures (-29°C to +72°C).
For loggers directly exposed to temperatures at or below -80°C, the expected accuracy is ±15 minutes per month
Measurement Intervals Pre-programmed: 10 minutes intervals
Computer Interface (physical) USB2.0
Data Retrieval Method Download to PC using a USB connection. Windows XP, 7, 8, 10. Adobe Reader software required.
Programming (Initialization) Method Comes pre-programmed. 30 minute start delay.
Wireless Connection and Range None
Remote Monitoring and Network Connection type None
Required Accessories: None
Optional Accessories: None
Included paperwork Quality Control sheet, NIST certificate, Packing List included with all purchases. See the Calibration page for more information.
Optional Paperwork Calibration Report including data included with purchase of Optional Calibration. See the Calibration page for more information.
Power Source, Battery Life and Replacement One CR2045 Lithium Battery. See Battery Performance page for more information.
Warranty 1 Year Limited Warranty

Specifications subject to change without prior notice.

USB Cable

MaxiLog-PDF report, page2
Single-use 90 day temperature data logger in water-resistant plastic packaging.
Back To Top