micro2 -200C Temperature Data Logger
A multi-use, coin-sized, liquid nitrogen temperature data recorder with LCD screen.
Temperature Range: -200°C to +72°C
Our new micro2 -200C is a compact multi-use, precision-edge device for capturing all your critical temperature data for liquid nitrogen storage and transportation needs. This data logger is highly versatile and can be used for those tight spaces needing compliance monitoring. Its light weight and small size make it ideal for dropping into your refrigerated boxes for drugs, vaccines, insulin and biologic shipments. And for pharmacies, cabinets and refrigerators, this device is perfect!
The external probe measures from -200°C to +72°C. View two temperatures, ambient and probe from the LCD. The compact LCD screen will show high/low and current temperatures in either Fahrenheit or Celsius. If an alarm has been triggered, the display will warn the user to proceed with caution.
The reader station is compact and plugs directly into the USB port for easy downloading of temperature profiles. MaxiThermal software, reader station and cable are sold separately. 21CFR software is also available if required.
|micro2 -200C – SKU #8116|
|Logger Category, Description||Category 2. Multi-Use. Temperature data logger with LCD screen and a compact size.|
|Memory/Storage||16k memory (approximately 16,000 measurements)|
Digital capacitive cmos sensor
Range: -29°C to +72°C / -20°F to +161°F
Accuracy: ±0.2° C from 0° C to 10° C, ±0.5° C at extemes, ±0.36° F from 32° F to 50° F, ±0.9° F at extremes
Resolution: 0.1° C / 0.18° F
|External Sensor/Probe count and connector type||PT-100
Range: -200° C to +72° C / -328° F to +160° F
Accuracy: ±0.5° C / ±0.9 °F
Resolution: 0.1° C / 0.18° F
Probe size: 38 gauge round wire, stainless tip – 2 inches
Probe length: 31.5 inches
|Alarm Programming||User configurable. High and low alarm limits can be set by temperature.|
|Alarm Modes||Exceed Limit. See Alarms for more information.|
|Alarm Reset Options||Alarm is reset when logger is erased and reprogrammed|
|Alarm Notifications||On screen text. See Alarms for more information.|
14.28 mm x 11.11 mm / 0.5625 in x 0.4375 in
|Indicators||On screen display|
|Size and Weight||Diameter: 2.8 cm / 1.1 in. Height: 1.1 cm / 0.4 in.
00 grams / .00 oz.
|Water-resistant||Yes, IP66 rated|
|Internal Firmware, Internal Clock Accuracy||Internal Clock, Start/Stop time, Interval, User description, Alarm values, Recording status, Firmware version, Serial number, Model.
Clock Accuracy is better than 2 minutes per month on average at normal temperatures (-29°C to +72°C).
For loggers directly exposed to temperatures at or below -80°C, the expected accuracy is ±15 minutes per month
|Measurement Intervals||Programmable from 2 seconds per reading. See Duration Chart for examples.|
|Computer Interface (physical)||USB Reader Station|
|Data Retrieval Method||Download to PC using a compatible cable, reader station, and software.|
|Programming (Initialization) Method||User programmable through PC using Marathon software.|
|Wireless Connection and Range||N/A|
|Remote Monitoring and Network Connection type||N/A|
|Required Accessories:||Compatible Software (1 required for operation): • MaxiThermal2 • MDAS-Pro • 21 CFR
Computer Interface (1 required for operation): • Reader Station
|Included paperwork||Quality Control sheet, NIST certificate, Packing List included with all purchases. See the Calibration page for more information.|
|Optional Paperwork||Calibration Report including data included with purchase of Optional Calibration. See the Calibration page for more information.|
|Power Source, Battery Life and Replacement||One CR2032 Battery. 3 years. See Battery Performance page for more information.
Batteries are changed as part of the recommended annual recalibration. For battery replacement only, Call for price.
|Warranty||1 Year Limited Warranty|
Specifications subject to change without prior notice.
Marathon’s MaxiThermal2 Software for USB Data Loggers
Marathon’s MaxiThermal2 Software allows you to view up to 8 multiple traces at one time, enables you to transfer the recorded information in your loggers to your computer, and to view, print and generate a report of the measurement data. The graphic representations are a simple X – Y plot of time versus temperature with unlimited zoom. The graph and all data points (date, time and temperature) can be printed.
Users have the ability to view numeric data in a screen window and Data can be Exported as a CSV file for use in other software. A Summary Information report showing the specific logger information, the Start and Stop Time, Duration of Recording, Measurement Interval, Highest, Lowest, Median and Average Temperatures as well as the High and Low Alarm information.
The data from the logger is easily downloaded to your PC via a standard USB 1.1 interface. MaxiThermal2 software is compatible with Windows XP, Vista, 7, 8 and 10.
MaxiThermal2 Software is not 21CFR Part 11 compliant. Click here for 21CFR Part 11 Compliant Software.
USB Standard A to Mini B Cable
-200°C to +72°C, -29°C to +72°C