MaxiLog-Hx Temperature Data Logger
For All Specialty Pharmacies and Wholesalers of Pharmaceutical Drugs to Retailers and End Users.
Temperature Range: -29°C TO +72°C / -20°F to +162°F
Our Maxilog-HX data logger comes in a compact size for all of your drugs, injectables, specialty creams, birth control, and diabetic drugs needing 24/7 quality assurance compliance.
Using this micro edge alert monitor, retail specialty pharmacies can send temperature sensitive prescription medications directly to end users. By noting the status of the ON and Alarm LEDs, patients will know whether the alarm has been triggered and can easily ascertain whether their medications stayed temperature compliant. This way, the end user can determine whether it is SAFE to use the delivered prescriptions.
If the Alarm LED is “flashing red,” the product has exceeded either high or low temperature specifications and the product should not be used. The pharmacy/shipper should be immediately contacted and informed that the drugs were not temperature compliant during delivery.
Setting the high and low temperature limits, recording intervals, and downloading data is easy with Marathon’s MaxiThermal2, software. Just plug the reader station into the USB port of a computer to read and program.
|MaxiLog-Hx – SKU #7049|
|Logger Category, Description||Category 1. Multi-Use. Compact temperature data logger.|
|Memory/Storage||2k memory (approximately 2,000 measurements)|
|Internal Sensor||Nist-traceable Precision thermistor
Range: -29°C to +72°C / -20°F to +162°F
Accuracy: ±0.5°C from 0°C to 10°C, ±1.0°C from 10°C to 70°C, ±2.0°C at extremes /
±0.9°F from 32° to 68°F, ±1.8°F from 50°F to 158°F, ±3.6°F at extremes
|External Sensor/Probe count and connector type||None|
|Alarm Programming||User programmable from 2 second to hours.|
|Alarm Modes||LED indicators|
|Alarm Reset Options||Alarm is reset when logger is erased and reprogrammed.|
|Alarm Notifications||Red LED flashes when alarm is triggered. See Alarms page for more information.|
|Indicators||LED indicators: on/recording (green), alarm (red)|
|Size and Weight||3.0 cm(l) x 3.0 cm(w) x .85 cm (h) / 1.18 in.(l) x 1.18 in (w) x .34 in.(h)
7 grams / .25 oz.
|Water-resistant||Yes, IP66 rating|
|Internal Firmware, Internal Clock Accuracy||Internal Clock, Start/Stop time, Interval, User description, Alarm values, Recording status, Firmware version, Serial number, Model.
Clock Accuracy is better than 2 minutes per month on average at normal temperatures (-29°C to +72°C).
For loggers directly exposed to temperatures at or below -80°C, the expected accuracy is ±15 minutes per month
|Measurement Intervals||Programmable from 2 seconds per reading. See Duration Chart for examples.|
|Computer Interface (physical)||USB|
|Data Retrieval Method||Download to PC using reader station and software|
|Programming (Initialization) Method||User Programmable through PC using Marathon software|
|Wireless Connection and Range||None|
|Remote Monitoring and Network Connection type||None|
|Required Accessories:||Compatible Software (1 required for operation): • Maxithermal2
Computer Interface (1 required): • Reader Station (sold separately)
|Included paperwork||QC sheet, NIST certificate, Packing List included with all purchases. See the Calibration page for more information.|
|Optional Paperwork||Calibration Report including data included with purchase of Optional Calibration. See the Calibration page for more information.|
|Power Source, Battery Life and Replacement||CR2016 battery with 1 year operating life for 1-day recording duration or longer. See Battery Performance page for more information.|
|Warranty||1 Year Limited Warranty|
Specifications subject to change without prior notice.
Marathon’s MaxiThermal2 Software for USB Data Loggers
Marathon’s MaxiThermal2 Software allows you to view up to 8 multiple traces at one time, enables you to transfer the recorded information in your loggers to your computer, and to view, print and generate a report of the measurement data. The graphic representations are a simple X – Y plot of time versus temperature with unlimited zoom. The graph and all data points (date, time and temperature) can be printed.
Users have the ability to view numeric data in a screen window and Data can be Exported as a CSV file for use in other software. A Summary Information report showing the specific logger information, the Start and Stop Time, Duration of Recording, Measurement Interval, Highest, Lowest, Median and Average Temperatures as well as the High and Low Alarm information.
The data from the logger is easily downloaded to your PC via a standard USB 1.1 interface. MaxiThermal2 software is compatible with Windows XP, Vista, 7, 8 and 10.
MaxiThermal2 Software is not 21CFR Part 11 compliant. Click here for 21CFR Part 11 Compliant Software.