Skip to content

c\temp-GEN2-80C Single-Use Coin Cell

This is our single-use dry ice temperature data logger with USB connectivity. Meets new IATA regulations for labelling.

Memory: 8k
Temperature Range:
-80°C to +30°C / -113°F to +86°F

CALL 800-858-6872

TO ORDER / MORE INFO


Download Product Brief:
ctemp-USB-80C Coin Cell Gen2
Download: Single-Use Quick Start Guide

Description

Our new compact c\temp-GEN 2-80C Coin Cell GEN2 data logger now comes with USB built-in. No cables required. Simply plug directly into the USB port and auto-download data immediately. Our Read Only software is free from our website and partners. Now connect immediately to your PC without having to worry about bringing the logger to room temperatures. You have asked and we have delivered. The device is IP 66 rated for moisture resistance for all your dry ice shipments.

This device is designed for measuring -80°C temperatures during the transportation of biologics, vaccines, chemicals, pharmaceuticals and ultra-frozen products. This product will surely satisfy all your product shipments requiring dry ice.

The Internal firmware provides the following features: time mechanisms, start time, intervals, end description details for special instructions, alarm values, recording status, measurement data, firmware version, serial numbers, model type, and after-the-fact report generation options.

MDAS software, includes language conversion on the fly from English to Spanish, German, Portuguese, Japanese and French.

To activate the logger, simple press the center Start symbol!

recycleMarathon will pay a US $5 rebate for each used electronic data logger (ctemp red, gray, yellow or blue) returned to us. This will help us meet our green environmental objectives and our customers will save the cost of the disposal of the electronic waste, which contains printed circuit boards and alkaline or lithium batteries. Go to the REBATE page for more information and to download the return form.

c\temp-GEN2-80C – SKU #7045
Logger Category, Description Category 2, Single-Use. Dry ice temperature compact data logger with Mini-USB connection to PC and internal thermistor.
Memory/Storage 8k memory (approximately 8,000 measurements)
Internal Sensor Precision NTC Thermistor
Range: -80°C to +30°C / -113°F to +86°F
Accuracy: ±0.5°C at 0° to 10°C, ±2.0°C at extremes / ±0.9°F at 32° to 50°F, ±3.6°F at extremes
External Sensor/Probe count and connector type None
Alarm Programming Pre-programmed to your specifications. Also user configurable at any time before the logger has been started. High and low alarm limits can be set by temperature and time.
Alarm Modes Exceed Limit, Continuous Interval, Cumulative. See Alarms page for more information.
Alarm Reset Options None
Alarm Notifications Red LED flashes when alarm has been triggered. See Alarms page for more information.
Audible Alarm None
Display None
Indicators LED indicators: on/recording (green), alarm (red)
Size and Weight 98.8 cm(l) x 3.5 cm(w) x 1.6 cm (h) /  3.5 in.(l) x 1.38 in (w) x 0.624 in.(h)
85 grams / 3.0 oz.
CE Certified Yes
Water-resistant Yes, IP66 rated
Internal Firmware, Internal Clock Accuracy Internal Clock, Start/Stop time, Interval, User description, Alarm values, Recording status, Firmware version, Serial number, Model.
Clock Accuracy is better than 2 minutes per month on average at normal temperatures (-29°C to +72°C).
For loggers directly exposed to temperatures at or below -80°C, the expected accuracy is °15 minutes per month
Measurement Intervals Programmable from 2 seconds per reading. See Duration Chart for examples.
Computer Interface (physical) USB Type A
Data Retrieval Method Use the PC USB port and MDAS software to download data.
Programming (Initialization) Method Comes pre-programmed to your specifications. Also user programmable through PC using a compatible cable and Marathon software before the unit has been started.
Wireless Connection and Range None
Remote Monitoring and Network Connection type None
Required Accessories: Compatible Software (1 required for operation): • MDAS Read-OnlyMDAS-Pro, • 21 CFR
Optional Accessories: None
Included paperwork Quality Control sheet, NIST certificate, Packing List included with all purchases. See the Calibration page for more information.
Optional Paperwork Calibration Report including data included with purchase of Optional Calibration. See the Calibration page for more information.
Power Source, Battery Life and Replacement Proprietary coin cell battery – single 3.6 V lithium with 1 year operating life and 3 year shelf life.
IATA approved battery – No labeling required. See Battery Performance page for more information.
Batteries are changed as part of the recommended annual recalibration. For battery replacement only, Call for price.
Warranty 1 Year Limited Warranty

Specifications subject to change without prior notice.

c\temp Read-only Software

Centralized Monitoring

Our MDAS Read-Only software is not for programming. This is used to read data collected from our ctemp single-use data loggers. It has all the features of the MDAS, but excludes the ability to program the devices. With IP Address access it is location independent so data loggers located anywhere can be centrally monitored and managed.

Marathon’s Data Analysis Software (MDAS) allows you to view up to 16 multiple traces at one time, enables you to transfer the information recorded in the logger to your computer, and to view, print and generate a report of the measurement data. The graphic representations include rotating 3D views, unlimited zooms, view temperature data points on the graph, view the total elapsed time or the exact time when it was recorded.

The graph and all data points (date, time and temperature) can be printed, as well as the ability to add a Note to the file for including information pertinent to that graphic trace. Users have the ability to view the numeric data within a screen window, calculate the Mean Kinetic Temperature of the recording as well as export data in a CSV format. A summary report showing the Start and Stop Time, High, Low, Median and Average temperatures as well as the Alarm information is also displayed. The data from the logger is downloaded to your PC via our proprietary RS232 serial interface cable or USB interface.

MDAS Read-Only software offers language support for English, French, German, Portuguese and Spanish. A separate installation program for Chinese and Japanese is also available on the CD-ROM with this version of the software. The software has been designed for the Microsoft operating system platforms and is compatible with Windows XP, Vista, 7, 8 and 10.

MaxiLog Cradle

USB Standard A to mini B Cable
Back To Top